Last Updated : February 12, 2013 Products Affected : S5_Fusion, System_5, eMix

I want to control my Pro Tools transport via my System 5 transport, what do I need to check?  S5 Fusion

 

1. In Emix
   1. System – Preferences
      1. Time Code source set to Serial

 

 

1. Must have Pro Tools Machine Control License on iLoks mounted to the Pro Tools machine
2. Recommend having the Keyspan Serial to USB adaptor – Sold separately, driver needs to be installed on the Pro Tools machine. (Mac will require the Keyspan USA-28X; PC may work with the 19-HS)
3. In Pro Tools
   1. System – Peripherals – Machine Control
      1. 9 Pin Remote - Deck Emulation
         1. Enable
         2. Select the Keyspan or other port that the Serial is on
         3. Machine Type select Pro Tools

 

 

1. System – Preferences – Synchronization
   1. Remote Mode
      1. Check Allow 9 Pin track Arm in Local
      2. Check Allow 9 Pin Transport in Local

 

 
 
With these settings, you should be able to use the System 5 transport and the Pro Tools transport simultaneously to navigate through your Emix session and Pro Tools Session. If you continue to have problems, please contact Euphonix Support.